Cricket Wireless System

The Cricket Wireless System was designed as a highly accurate seamless wireless analog bridge that can convert most wired sensors or analog inputs into a seamless wireless connection between most any 4-20 ma, 0-5 VDC or 0-10 VDC sensor and data logger, controller or SCADA equipment, eliminating up to 20 miles of wiring.
The units consist of a wireless, bi-directional Master/Slave transceiver that allows from one to four channels of analog inputs and outputs. Each Master/Slave controllers has 4 channels of 12-bit analog inputs and 4 channels of 12-bit analog outputs allowing for a full duplex, bi-directional analog I/O.  Each controller is also equipped with one optically isolated ON/OFF type input and output.

iwirelessMost important features:
• 1, 2, 3 or 4 channels
• Inputs can be configured for 4-20 ma, 0-5 VDC or 0-10 VDC
signals
• Outputs can be configured for 0-5 VDC, 1-5 VDC or digital
•Transmitter/Receiver setup via RS232 interface
• License Free ISM Band Worldwide under FCC part 15 and      ECT 300.328
• 900 MHz and 2.4 GHz FHSS ISM band Transceiver
• Transmission Distance up to 20 miles (with Modified       Antennas)
• Easy to install and set up

Note: Cricket Wireless Transceiver, Model RT12-4411, shown with included antenna.  Transceivers are sold as a pair to provide a complete transmission function.

General Specifications:
• Input Ranges:              4-20 ma, 0-5 VDC or 0-10 VDC
• Data Conversion:         12 Bit A/D, D/A
• Resolution:                 0.02% Full Scale
• Configuration:             1, 2, 3 or 4 channels , Each channel configured independently of the other , Transmitter and Receiver configured independently

I/O Configuration Table:

Screen Shot 2014-05-02 at 1.18.32 PM

• Food processing
• Onboard Diagnostics:    Audible Beep for communications failure,
Input Voltage Failure or Analog Voltage Failure
• Power Supply:             8.0 to 14.1 VDC, @ 120 ma
• Operating Temperature:-40° to 80° C
• Humidity:                    20 to 90 % Non-Condensing
• Mechanical:                  Din Rail or hard mount,
3.94W x 2.76H x 4.43D
• Weight:                       Approx 1.1lbs

Click here to download Product Information, Cricket_Datasheet.pdf

Reference: click here.

D&D Engineering – “W’ere YOUR Sensor Guys”
3835 E. Thousand Oaks Blvd. Suite 464 Westlake Village, CA 91362  – Voice: (818) 772-8720 Fax: (818) 772-2477 Toll Free: (888) 333-6474
Email: sales@sensorguys.com Website: www.sensorguys.com