TILTIX INCLINOMETERS

LINARIX Linear Sensors Group

Inclinometers, also called tilt sensors are designed to measure the angle of an object with respect to the force of gravity. These tilt or level meters determine pitch and/or roll angle and output these values via the appropriate electrical interface. Inclinometers are easy to integrate to an application, because there is no need for mechanical linkages other than just the installation itself – a real advantage for design engineers. Posital developed several inclinometer types to have a suitable solution for different applications for each industry. Accurate measurement of the degree of tilt or inclination from a horizontal position is very important for many motion control systems or to ensure safety. 

  • Well Protected up to IP69K
  • Rugged and Compact Design
  • Measurement Range ±80° (Dual Axis) or 360° (Single Axis)

Dynamic Inclinometers

These inclinometers are equipped with a 3D MEMS accelerometer and a 3D MEMS gyroscope. A smart algorithm combines the signal of accelerometer and gyroscope to eliminate the effect of accelerations (e.g. due to rapid motion of the equipment), vibrations and shocks. 

  • Compensation of External Accelerations
  • Clean Measurement During Dynamic Movements
  • Accuracy 0.3°
  • Interfaces: CANopen

Static Inclinometers

These inclinometers are equipped with a 2D MEMS accelerometer as sensor cell. This type of inclinometer achieves a high accuracy in a static system or when the machine is only in a slow motion. 

  • Accuracy 0.1° or 0.5°
  • Interfaces: CANopen, Analog Current, Analog Voltage, RS232, SSI, J1939, DeviceNet

Installation and Mounting Options

Dependent on the application and machine it may be necessary to mount the inclinometer horizontally to monitor the tilt angle of two axes or to install the sensor vertically to measure one axis.

dual_axes

dual axis sensor is used for horizontal mounting and is ideal for leveling applications. This version got two outputs, one for the X-Axis and one for the Y-Axis. Each of the axes show the tilt angle with respect to the field of gravity.

single_axis

single axis tilt measurement version with one axis output is intended for vertical mounting.

Applications

Inclinometer offer an easy and efficient way of monitoring spatial orientation without the need for mechanical linkages – a real advantage for design engineers.

Static inclinometers can significantly improve operating safety in mobile machines, platform monitoring or medical applications by continuously monitoring the tilt or inclination angles. Inclinometers are much easier and thus less expensive to install compared to Rotary Encoders, which makes them ideal for applications like solar trackers. 

The dynamic inclinometer outputs a clean measurement signal and can be used reliably on mobile equipment such as construction machinery, mining equipment, agricultural machinery, cranes, and anywhere else where sudden movements, shocks and vibrations are likely to be encountered.

D&D Engineering – “W’ere YOUR Sensor Guys”
3835 E. Thousand Oaks Blvd. Suite 464 Westlake Village, CA 91362  – Voice: (818) 772-8720 Fax: (818) 772-2477 Toll Free: (888) 333-6474
Email: sales@sensorguys.com Website: www.sensorguys.com

Humidity & Temperature Transmitter

Humidity & Temperature Transmitter  —Good quality, better price !
Features:
       Power supply:          12~36V DC
       Detecting range:        Humidity 0-100%RH,  Temperature -40~80Celsius
       Accuracy:                  Humidity +-2%RH,  Temperature +-0.3Celsius
       Selectable Output:      0-5V DC or 0-10V DC or 4-20mA or RS485 signal
       Wall mounting and duct type selectable.
       Light weight, easy installation.
       Full range temperature compensated.
MaxDetect capacitive humidity element based humidity & temperature transmitters are ideal solution for detecting relative humidity and temperature in applications such as HVAC in residential & commercial buildings. 

The capacitance element based transmitter is one of the most stable transmitters available and no recalibration required, transmitters are temperature compensated and calibrated.

MaxDetect transmitters are problem-free and accurate with long-term reliability by apply unique HydroProbe digital technology, our transmitters are developed for high-precision measurement of relative humidity & temperature and transmitters are available for wall & duct & outdoor mounting.

And all MaxDetect transmitters can be equipped with industrial-class LCD display, LCD shows both humidity and temperature.

D&D Engineering – “W’ere YOUR Sensor Guys”
3835 E. Thousand Oaks Blvd. Suite 464 Westlake Village, CA 91362  – Voice: (818) 772-8720 Fax: (818) 772-2477 Toll Free: (888) 333-6474
Email: sales@sensorguys.com Website: www.sensorguys.com

About Smartec

Founded in 1987, Smartec B.V. was established out of a laboratory concept.

A temperature sensor, with digital output, was developed at the Delft University of Technology (TUD), Netherlands. The sensor, which does not require calibration, has proved to be more accurate and stable than any other digital temperature sensor on the market, and has achieved worldwide sales of over 15 million.

Through research and development initiatives, our product range has been further enhanced with the introduction to market of the humidity sensor, and infrared sensor. We have also launched the Universal Transducer Interface (UTI), and a complete line of pressure sensors in the range of 0.01 PSI until 300 PSI.

Following 18 years of intensive research by scientific staff at the TUD, an improved version of Smartecs digital temperature sensor, named SMT172, was introduced in 2015. The SMT172 has proved to be the most accurate sensor in the world and has extensive worldwide sales.   

Over the years Smartec has built up strategic alliances with top rated semiconductor companies in Europe and the Far East. These alliances have led to long-term partnerships, excelling in close cooperation in research and development, not only with Smartec but also with Universities of Technology all over Europe.

We continuously expand our global sales network and we have sales representatives in over 20 countries worldwide.

D&D Engineering – “W’ere YOUR Sensor Guys”
3835 E. Thousand Oaks Blvd. Suite 464 Westlake Village, CA 91362  – Voice: (818) 772-8720 Fax: (818) 772-2477 Toll Free: (888) 333-6474
Email: sales@sensorguys.com Website: www.sensorguys.com

Lowered Cost and Increased Speed for Biologics Production

 by Mic Chaudoir

With protocols for bioprocessing now firmly established, there is an increasing focus on reducing the cost of producing biologics, biosimilars, mABs and other modern medicines that require bioreactions. Producing these pharmaceuticals promises to revolutionize treatment of many difficult diseases, especially modern scourges that have been resistant to small molecule-based therapies. Focus on cost reduction and improved speed has centered on two promising developments: so-called “single use” bioreactors and “continuous” bioreactors.

Single use bioreactors lower costs by reducing the time and materials for sterilization and cleaning between production runs. In a conventional bioreactor, all material in contact with the bioreaction requires extensive and thorough cleaning and sterilization to prevent contamination. These processes in turn require extensive use of corrosion-resistant stainless steel and other resistant elastomers and materials. The extensive use of these costly materials is a major driver in construction cost for new facilities. Single use reactors, by contrast, use disposable bags to contain biomass during the reaction. Rather than sterilization, many of the components of these systems can simply be discarded in between runs, reducing initial material costs and time required in between batches. Alicat helps meet the challenge of these systems by offering fast, flexible mass flow control at an affordable price. Alicat’s COMPOSER “Gas Select” feature means that our modern high speed controllers can function for multiple gasses with ASTM traceable accuracy (including, Air, CO2, and Oxygen – over 100 in all). Controllers can then be moved between systems as needed, providing redundancy at lower price points. Additionally, single use reactors are often used to “scale-up” processes. The high turndown ratio of Alicat’s Mass flow controllers (up to 10:000 to 1 in some cases) mean that flows from a few sccm up to slpm ranges can be accommodated with the same mass flow controllers – allowing the mass flow control to scale with the reactor size.

Continuous bioreactors have been described as the “holy grail” of biologic production. These reactors are still a developing technology, but the promise can provide a bioreaction that allows for production over extended periods of time. Instead of typical reactions which are carried out for weeks to months – these bioreactors are designed to run for months to years. As with single use reactors, this would greatly reduce the cost per run. This is accomplished by dramatically extending the time of production between sterilizations. For this promise to be realized, homeostasis needs to be achieved by extremely accurate and responsive control of conditions within the reactor. Alicat can help overcome this challenge by providing extreme accuracy, responsiveness and control for your gas flow needs. Alicat’s controllers have an astonishing mass flow accuracy as low as .1% of full scale and unbeatable repeatability of +/- .02% of full scale readings. Additionally, Alicat supports a variety of protocols and connections to ensure compatibility with your preferences. A custom-built, high accuracy mass flow controller with this level of precision is typically available less than two weeks after ordering!

The speed of biologics development and bioprocess production continue to advance with lower costs, higher speeds and greater flexibility. Shouldn’t your mass flow controller be able to keep up ? Alicat – the world’s fastest flow control company.

D&D Engineering – “W’ere YOUR Sensor Guys”
3835 E. Thousand Oaks Blvd. Suite 464 Westlake Village, CA 91362  – Voice: (818) 772-8720 Fax: (818) 772-2477 Toll Free: (888) 333-6474
Email: sales@sensorguys.com Website: www.sensorguys.com

Alicat Scientific attending BioAsia 2019

 by Mic Chaudoir

The BioAsia 2019 Life Sciences 4.0 Meeting is coming to Hyderabad, India from February 25-27 at the HICC. Alicat will be exhibiting our line of scientific flow control instrumentation at BioAsia for the first time inside the Scientific Enabler Pavilion

Alicat has recently announced our upgraded mass flow controllers with dramatic improvements in precision, response time and operating range. These newly upgraded units provide unmatched turndown ratios and incredible accuracy for low-mid range mass flow control. Alicat also has a full line of products for high flow rates, liquid flows, corrosive materials and other specialized flow control needs.

Alicat also shares BioAsia’s passion for Bioreactors. Alicat has a range of mass flow controllers suitable for bioreactor flow control and measurement. The innovative COMPOSER feature allows NIST-traceable accuracy of mass flow measurement under rapidly changing conditions. Other features of interest to bioprocessing engineers include a variety of protocols and connections to fit existing any format, as well as extremely large turndown ratios (exceeding 1,000:1) allowing for unprecedented scalability.

This will be the first time that Alicat has exhibited at this important conference. We’re happy to join the BioAsia community. Visit Booth # 38 and see what the fastest flow controller company in the world can do for you.

D&D Engineering – “W’ere YOUR Sensor Guys”
3835 E. Thousand Oaks Blvd. Suite 464 Westlake Village, CA 91362  – Voice: (818) 772-8720 Fax: (818) 772-2477 Toll Free: (888) 333-6474
Email: sales@sensorguys.com Website: www.sensorguys.com

TILTIX INCLINOMETER WITH MODBUS RTU INTERFACE

POSITAL’s TILTIX inclinometers are now also available with Modbus RTU support
tiltix__with_modbusrtu
  • Full 360° Single Axis or Dual Axis ±80°
  • Shock Immunity up to 100 g
  • Tough Fiber-reinforced PBT and Heavy Duty Die-cast Aluminum Housings Available.
  • Programmable Measurement Resolution, Zero Setting and Direction via API

Robust and Cost Efficient Tilt Monitoring

POSITAL TILTIX inclinometers are now available with a new communication interface, Modbus RTU. Modbus RTU protocols, which are openly published and royalty-free, have emerged as a de-facto standard for simple, robust and cost-efficient data acquisition and control systems built around standard PLCs. Modbus RTU nodes can be connected together through RS-485 serial connections with up to 32 devices connected to the bus.

Industries

TILTIX inclinometers with Modbus RTU interface are ideal for solar energy systems where it is necessary to monitor the spatial orientation of multiple collectors or reflectors. They can also be used in production machineries like textile manufacturing, paper manufacturing or for material handling equipment and in many other applications where a practical, low-cost position control solution is required.

D&D Engineering – “W’ere YOUR Sensor Guys”
3835 E. Thousand Oaks Blvd. Suite 464 Westlake Village, CA 91362  – Voice: (818) 772-8720 Fax: (818) 772-2477 Toll Free: (888) 333-6474
Email: sales@sensorguys.com Website: www.sensorguys.com

USA Distributor

D&D Engineering is the USA Distributor for SMARTEC

D&D Engineering – “W’ere YOUR Sensor Guys”
3835 E. Thousand Oaks Blvd. Suite 464 Westlake Village, CA 91362  – Voice: (818) 772-8720 Fax: (818) 772-2477 Toll Free: (888) 333-6474
Email: sales@sensorguys.com Website: www.sensorguys.com

About MaxDetect

MaxDetect Technology Co.,Ltd.

MaxDetect Technology Co.,Ltd is a high-tech company which concentrate on producing and providing sensor solutions with unique and reliable performance. Based upon the advantages of located at Shenzhen which is one of most active city in electronic industry, customers from overseas who need sensors will be fully cared by MaxDetect.

MaxDetect offer humidity & temperature sensor, humidity & temperature transmitter, humidity & temperature controller, temperature sensor, etc. 

MaxDetect also offer value-added services of procurement outsourcing for customers and are putting all the effort to offer eco-friendly & trouble-free & accurate & stable products to customers. 

Choose MaxDetect, choose your specialist.

D&D Engineering – “W’ere YOUR Sensor Guys”
3835 E. Thousand Oaks Blvd. Suite 464 Westlake Village, CA 91362  – Voice: (818) 772-8720 Fax: (818) 772-2477 Toll Free: (888) 333-6474
Email: sales@sensorguys.com Website: www.sensorguys.com

Universal Transducer Interface (UTI)

The Universal Transducer Interface (UTI) is a sensor-to-time signal converter, based on a self-calibrating period-modulated oscillator. Sensing elements can be directly connected to the UTI without the need for extra electronics. The output is digital and can communicate with any type of micro-controller. The UTI can operate in 16 different modes. To obtain accurate results in any of these modes, a reference element of the same kind as the sensor is required.

The UTI provides interfacing for all kind of resistive and capacitive sensors.

For convenient design-in, there is an evaluation board available. The UTI evaluation board and free down-loadable software ensure that custom applications will be up and running in no time.

Key Features

  • Accurate measurement of various sensors:
  • Capacitance values (2-300 pF, 14 bits)
  • PT100/1000 elements (14 bits 9 mK)
  • Resistive bridges (12 bits, resolution 700 nV)
  • Continues auto-calibration
  • Single power supply2.9-5.5V

Reference: click here.

D&D Engineering – “W’ere YOUR Sensor Guys”
3835 E. Thousand Oaks Blvd. Suite 464 Westlake Village, CA 91362  – Voice: (818) 772-8720 Fax: (818) 772-2477 Toll Free: (888) 333-6474
Email: sales@sensorguys.com Website: www.sensorguys.com