by Mic Chaudoir
Accurate simplified testing for small volumes and differing configurations
A revolution in bioprocessing is underway in the form of single-use technologies. Single-use offers the promise of lower costs, improved flexibility and shorter cycle times. But what happens when a single-use bag or component fails ? It’s obvious that system integrity is critical for any bioprocess, but how can you know that your system is free of leaks before use ? Integrity testing can now be accomplished easily and quickly with an Alicat Scientific Whisper series mass flow meter or controller.
Fast and accurate leak checking can be a complicated process requiring a rather complex setup. When the Device Under Test (DUT) is subjected to a constant pressure within a closed system, any resulting flow is a direct measure of the leak rate. This test requires both stable pressure control at the DUT and accurate flow measurement to test for leakage. Leakages are most easily revealed and measured when the meter generates minimal pressure drop, the frictional resistance that the device introduces into the gas line.
For years, Alicat Scientific has provided a two-unit leak checking systems using a PC3-Series remote sensing pressure controller to maintain the required test pressure at the DUT and an M-Series mass flow meter to measure the leak rate.
More recently, Alicat has pioneered the simplified testing for leaks using a single Whisper series mass flow controller. This simplified process makes testing the myriad bags and containers used in single-use bioprocessing easier and more flexible. With full-scale pressure drops as low as 3.6 mbar (0.052 psid) and turned-down pressure drops as low as 0.018 mbar, the Whisper allows precise and responsive control with minimal frictional resistance.
For leak checking smaller test volumes, such as valves or sensors, a single MCW-Series mass flow controller that is set to control for pressure will maintain a constant pressure at the DUT while providing accurate mass and volumetric flow readings in real time. Configured this way, the Whisper serves the functions of both a pressure controller and a mass flow meter in one device. Alicat’s Whisper now makes leak checking for the small volumes needed for single-use technologies even faster…and simpler. This configuration also makes changing the configuration to test different devices, or testing infrequently, very achievable. From Alicat: The fastest flow controller company in the world.
Fast Leak Testing for Single-Use Bioprocessing
A revolution in bioprocessing is underway in the form of single-use technologies. But what happens when a single-use bag or component fails? How do you know that your bioprocessing is free from costly leaks or integrity failures? Leak testing of single use systems can now be accomplished easily and quickly with an Alicat Scientific Whisper series mass flow meter.
D&D Engineering – “W’ere YOUR Sensor Guys”
3835 E. Thousand Oaks Blvd. Suite 464 Westlake Village, CA 91362 – Voice: (818) 772-8720 Fax: (818) 772-2477 Toll Free: (888) 333-6474
Email: firstname.lastname@example.org Website: www.sensorguys.com