The SMT172 is a three terminal integrated temperature sensor with a duty-cycle output. Two of the terminals are used for the power supply (2.7 -5.5 Volts) and the third terminal carries the output signal.
A duty cycle modulated output is used so that the output can be read by a microprocessor, while the analogue information is still available.
The sensors are available in a number of encapsulations: TO18, TO92, TO220, SOIC-8L, SOT223, HEC and in a 7 mm ss. probe with 5 mtr cable. The SMT172 can be supplied as a naked die as well.
For quick design-in, a lot of applications are available on the web and for those who want plug and play, we have designed a Smart Temperature Acquisition System for 4 or 8 Smartec temperature sensors. It was designed to get the best possible temperature measurement results with the SMT172 temperature sensors (absolute accuracy 0.1 °C, noise <0.0001 °C), at low cost. We offer an application to connect the board to an Excel application. In this way, a low budget , high accuracy measurement system can be built.
The SMT172 has an overall accuracy of 0.1 °C in the range from -20 °C to +60 °C and an accuracy of 0.4 °C from -45 to +130 °C. This makes the sensor especially useful in all applications where human conditions (climate control, food processing etc.) are to be controlled.
The CMOS output of the sensor can drive cable lengths up to 20 meters. This makes the SMT172 very useful in remote sensing and control applications.
D&D Engineering – “W’ere YOUR Sensor Guys”
3835 E. Thousand Oaks Blvd. Suite 464 Westlake Village, CA 91362 – Voice: (818) 772-8720 Fax: (818) 772-2477 Toll Free: (888) 333-6474
Email: email@example.com Website: www.sensorguys.com